三维层状黏弹性半空间中球面SH、P和SV波源自由场          下载免费PDF全文

巴振宁  梁建文  张艳菊 《地球物理学报》2016,59(2):606-623

采用刚度矩阵方法结合Hankel积分变换,求解了层状黏弹性半空间中球面SH、P和SV波的自由波场.首先,在柱坐标系下建立层状黏弹性半空间的反轴对称(柱面SH波)和轴对称(柱面P-SV波)情况精确动力刚度矩阵.进而由Hankel变换将空间域内的球面波展开为波数域内柱面波的叠加,然后将球面波源所在层的上下端面固定,求得固定层内的动力响应和固定端面反力,将固端反力反向施加到层状黏弹性半空间上,采用直接刚度法求得固端反力的动力响应,叠加固定层内和固端反力动力响应,求得波数域内球面波源动力响应.最后由Hankel积分逆变换求得频率-空间域内球面波源自由场,时域结果由傅里叶逆变换求得.文中验证了方法的正确性,并以均匀半空间和基岩上单一土层中球面SH、P和SV波为例分别在频域和时域内进行了数值计算分析.研究表明基岩上单一土层中球面波自由场与均匀半空间情况有着本质差异;基岩上单一土层中球面波位移频谱峰值频率与场地固有频率相对应,基岩面的存在使得基岩上单一土层地表点的位移时程非常复杂,振动持续时间明显增长;阻尼的增大显著降低了动力响应的峰值,同时也显著减少了波在土层的往复次数.  相似文献   

多通道大功率电法勘探仪集成试验   总被引：5，自引：2，他引：3       下载免费PDF全文

底青云  雷达  王中兴  张一鸣  王顺  张启卯  张文伟  欧阳涛 《地球物理学报》2016,59(12):4399-4407

采用自主研发的多通道大功率电法勘探仪进行了深部矿勘探测试.首先在河北省张家口市张北县进行了仪器整体的调试和波形测试等试验,试验结果表明,在大偏移距情况下,尽管存在50 Hz电磁干扰,也能获得与发射波形相关的波形曲线,验证了仪器系统的正确性和稳定性.然后在内蒙古曹四夭钼矿区采集了4.8km的剖面数据,并进行了相应的数据处理工作.对所采集的数据进行了大地脉冲响应计算、峰值时刻提取和视电阻率计算,以及电阻率二维反演工作,反演的的电阻率断面结构与已知地质资料相吻合,验证了数据流程和处理方法的正确性.此次多通道大功率电法勘探仪的成功集成,为进一步大规模比对试验和装备整装勘探打下了基础.  相似文献   

Seismic fragility of reinforced concrete girder bridges using Bayesian belief network          下载免费PDF全文

Paolo Franchin  Alessio Lupoi  Fabrizio Noto  Solomon Tesfamariam 《地震工程与结构动力学》2016,45(1):29-44

Infrastructure owners and operators, or governmental agencies, need rapid screening tools to prioritize detailed risk assessment and retrofit resources allocation. This paper provides one such tool, for use by highway administrations, based on Bayesian belief network (BBN) and aimed at replacing so‐called generic or typological seismic fragility functions for reinforced concrete girder bridges. Resources for detailed assessments should be allocated to bridges with highest consequence of damage, for which site hazard, bridge fragility, and traffic data are needed. The proposed BBN based model is used to quantify seismic fragility of bridges based on data that can be obtained by visual inspection and engineering drawings. Results show that the predicted fragilities are of sufficient accuracy for establishing relative ranking and prioritizing. While the actual data and seismic hazard employed to train the network (establishing conditional probability tables) refer to the Italian bridge stock, the network structure and engineering judgment can easily be adopted for bridges in different geographical locations. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Shaking‐table tests of flat‐bottom circular silos containing grain‐like material          下载免费PDF全文

Stefano Silvestri  Salvador Ivorra  Laura Di Chiacchio  Tomaso Trombetti  Dora Foti  Giada Gasparini  Luca Pieraccini  Matt Dietz  Colin Taylor 《地震工程与结构动力学》2016,45(1):69-89

According to Eurocode 8, the seismic design of flat‐bottom circular silos containing grain‐like material is based on a rough estimate of the inertial force imposed on the structure by the ensiled content during an earthquake: 80% of the mass of the content multiplied by the peak ground acceleration. A recent analytical consideration of the horizontal shear force mobilised within the ensiled material during an earthquake proposed by some of the authors has resulted in a radically reduced estimate of this load suggesting that, in practice, the effective mass of the content is significantly less than that specified. This paper describes a series of laboratory tests that featured shaking table and a silo model, which were conducted in order to obtain some experimental data to verify the proposed theoretical formulations and to compare with the established code provisions. Several tests have been performed with different heights of ensiled material – about 0.5 mm diameter Ballotini glass – and different magnitudes of grain–wall friction. The results indicate that in all cases, the effective mass is indeed lower than the Eurocode specification, suggesting that the specification is overly conservative, and that the wall–grain friction coefficient strongly affects the overturning moment at the silo base. At peak ground accelerations up to around 0.35 g, the proposed analytical formulation provides an improved estimate of the inertial force imposed on such structures by their contents. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

High‐resolution seismic monitoring of instrumented buildings using a model‐based state observer          下载免费PDF全文

K. Erazo  E. M. Hernandez 《地震工程与结构动力学》2016,45(15):2513-2531

This paper proposes a model‐based state observer to perform high‐definition response estimation in partially instrumented building structures. The proposed estimator is verified in a simulated five‐story shear‐building structure and validated using measurements from a seven‐story reinforced concrete building slice tested at the NEES‐University of California at San Diego shake table. In both cases the proposed estimator yielded satisfactory results by estimating the time history of shear forces, bending moments, displacements, and strains at various points/sections of interest. The proposed algorithm can be used in instrumented buildings for various practical applications such as post‐earthquake damage assessment, structural control, and building code calibration. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

In‐plane and out‐of‐plane behavior of confined masonry walls for various toothing and openings details and prediction of their strength and stiffness          下载免费PDF全文

Vaibhav Singhal  Durgesh C. Rai 《地震工程与结构动力学》2016,45(15):2551-2569

Eight half‐scale brick masonry walls were tested to study two important aspects of confined masonry (CM) walls related to its seismic behavior under in‐plane and out‐of‐plane loads. Four solid wall specimens tested to investigate the role of type of interface between the masonry and tie‐columns, such as toothing varying from none to every course. The other four specimens with openings were tested to study the effectiveness of various strengthening options around opening to mitigate their negative influence. In the set of four walls, one wall was infilled frame while the other three were CM walls of different configurations. The experimental results were further used to determine the accuracy of various existing models in predicting the in‐plane response quantities of CM walls. Confined masonry walls maintained structural integrity even when severely damaged and performed much better than infill frames. No significant effect of toothing details was noticed although toothing at every brick course was preferred for better post‐peak response. For perforated walls, provision of vertical elements along with continuous horizontal bands around openings was more effective in improving the overall response. Several empirical and semi‐empirical equations are available to estimate the lateral strength and stiffness of CM walls, but those including the contribution of longitudinal reinforcement in tie‐columns provided better predictions. The available equations along with reduction factors proposed for infills could not provide good estimates of strength and stiffness for perforated CM walls. However, recently proposed relations correlating strength/stiffness with the degree of confinement provided reasonable predictions for all wall specimens. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Discussion of ‘Modelling viscous damping in nonlinear response history analysis of buildings for earthquake excitation’ by Anil K. Chopra and Frank McKenna          下载免费PDF全文

John F. Hall 《地震工程与结构动力学》2016,45(13):2229-2233

This discussion deals with recommendations in the paper on appropriate damping formulations for use in nonlinear response history analysis of buildings. Concern over potentially excessive damping forces and moments should extend beyond the damping moments produced by the stiffness proportional part of Rayleigh damping that corresponds to rotational springs used to explicitly model plastic hinges. The key to an appropriate damping formulation for nonlinear analysis is a realistic mechanism that allows all damping forces and moments to be meaningfully assessed. Then features can be added to keep these forces and moments within reasonable bounds. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Channel response to an extreme flood and sediment pulse in a mixed bedrock and gravel‐bed river          下载免费PDF全文

Andrew Nelson  Kathy Dubé 《地球表面变化过程与地形》2016,41(2):178-195

We exploit a natural experiment caused by an extreme flood (~500 year recurrence interval) and sediment pulse derived from more than 2500 concurrent landslides to explore the influence of valley‐scale geomorphic controls on sediment slug evolution and the impact of sediment pulse passage and slug deposition and dispersion on channel stability and channel form. Sediment slug movement is a crucial process that shapes gravel‐bed rivers and alluvial valleys and is an important mechanism of downstream bed material transport. Further, increased bed material transport rates during slug deposition can trigger channel responses including increases in lateral mobility, channel width, and alluvial bar dominance. Pre‐ and post‐flood LiDAR and aerial photographs bracketing the 2007 flood on the Chehalis River in south‐western Washington State, USA, document the channel response with high spatial and temporal definition. The sediment slug behaved as a Gilbert Wave, with both channel aggradation and sequestration of large volumes of material in floodplains of headwaters' reaches and reaches where confined valleys enter into broad alluvial valleys. Differences between the valley form of two separate sub‐basins impacted by the pulse highlight the important role channel and channel‐floodplain connectivity play in governing downstream movement of sediment slug material. Finally, channel response to the extreme flood and sediment pulse illustrate the connection between bed material transport and channel form. Specifically, the channel widened, lateral channel mobility increased, and the proportion of the active channel covered by bars increased in all reaches in the study area. The response scaled tightly with the relative amount of bed material sediment transport through individual reaches, indicating that the amount of morphological change caused by the flood was conditioned by the simultaneous introduction of a sediment pulse to the channel network. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

基于响应面法的高堆石坝瞬变-流变参数反演方法     

杨荷  周伟  马刚  李少林  常晓林 《岩土力学》2016,37(6):1697-1705

如何准确确定原级配堆石体的力学参数是高堆石坝建设中亟待解决的一个关键问题,参数反演是解决这一问题的可行方法之一,传统的参数反演方法因需要进行大量的有限元正分析,其计算工作量大,反演效率较低。响应面法可以有效克服以上问题,但已有方法仅针对堆石体的瞬变参数,未考虑流变参数,不能满足堆石坝长期变形预测的需要。综合考虑瞬变和流变参数,通过构造更加合理的响应面函数,提出了基于响应面法的高堆石坝瞬变-流变材料参数反演方法,大大提高了反演的效率和精度。以水布垭面板堆石坝为例,采用该方法对坝体瞬变和流变参数进行了反演分析。反演结果表明,计算值与实测值在数值和变化规律上总体符合较好,反演结果合理可靠且更加高效。  相似文献   

爆炸液化场地中浅埋钢筋混凝土结构动力响应的现场试验研究     

陈育民  张意江  王维国  陈晨伟 《岩土力学》2016,37(12):3506-3512

饱和砂土地基在爆炸荷载作用下会发生液化,地基上的结构物将受到爆炸荷载及地基液化的双重作用,从而产生不均匀沉降和破坏性变形。基于大型现场爆炸液化试验,对场地上钢筋混凝土(RC)结构的动力响应和地基液化后RC结构的变形进行了分析研究。结果表明:液化场地中浅埋RC结构产生了明显的不均匀沉降,且最大沉降量达到结构高度的10%,结构差异沉降达到最大沉降量的1/5,结构沉降变形在液化后15 h时基本稳定;RC结构表面未产生明显的裂缝,动态拉、压应变均在400??以内,不会对结构造成显著破坏;结构动力响应表现为柱侧加速度峰值明显大于梁侧,但柱侧动力稳定所需时间较梁侧短,即柱承受了更大的瞬时冲击力且其抵抗瞬时冲击力的能力更强。研究结果可以为在可液化地基中的浅埋RC结构稳定设计等工程情况提供参考。  相似文献